.. doctest-skip-all
.. include:: references.txt
.. _astropy-io-votable:
*******************************************
VOTable XML Handling (`astropy.io.votable`)
*******************************************
Introduction
============
The `astropy.io.votable` sub-package converts VOTable XML files to and
from ``numpy`` record arrays.
Getting Started
===============
Reading a VOTable File
----------------------
To read in a VOTable file, pass a file path to
`~astropy.io.votable.parse`::
from astropy.io.votable import parse
votable = parse("votable.xml")
``votable`` is a `~astropy.io.votable.tree.VOTableFile` object, which
can be used to retrieve and manipulate the data and save it back out
to disk.
VOTable files are made up of nested ``RESOURCE`` elements, each of
which may contain one or more ``TABLE`` elements. The ``TABLE``
elements contain the arrays of data.
To get at the ``TABLE`` elements, you can write a loop over the
resources in the ``VOTABLE`` file::
for resource in votable.resources:
for table in resource.tables:
# ... do something with the table ...
pass
However, if the nested structure of the resources is not important,
you can use `~astropy.io.votable.tree.VOTableFile.iter_tables` to
return a flat list of all tables::
for table in votable.iter_tables():
# ... do something with the table ...
pass
Finally, if you expect only one table in the file, it might be most convenient
to use `~astropy.io.votable.tree.VOTableFile.get_first_table`::
table = votable.get_first_table()
Alternatively, there is a convenience method to parse a VOTable file and
return the first table all in one step::
from astropy.io.votable import parse_single_table
table = parse_single_table("votable.xml")
From a `~astropy.io.votable.tree.Table` object, you can get the data itself
in the ``array`` member variable::
data = table.array
This data is a ``numpy`` record array.
The columns get their names from both the ``ID`` and ``name``
attributes of the ``FIELD`` elements in the ``VOTABLE`` file.
Examples
^^^^^^^^
..
EXAMPLE START
Reading a VOTable File with astropy.io.votable
Suppose we had a ``FIELD`` specified as follows:
.. code-block:: xml
representing the ICRS declination of the center of the image.
.. note::
The mapping from VOTable ``name`` and ``ID`` attributes to ``numpy``
dtype ``names`` and ``titles`` is highly confusing.
In VOTable, ``ID`` is guaranteed to be unique, but is not
required. ``name`` is not guaranteed to be unique, but is
required.
In ``numpy`` record dtypes, ``names`` are required to be unique and
are required. ``titles`` are not required, and are not required
to be unique.
Therefore, VOTable's ``ID`` most closely maps to ``numpy``'s
``names``, and VOTable's ``name`` most closely maps to ``numpy``'s
``titles``. However, in some cases where a VOTable ``ID`` is not
provided, a ``numpy`` ``name`` will be generated based on the VOTable
``name``. Unfortunately, VOTable fields do not have an attribute
that is both unique and required, which would be the most
convenient mechanism to uniquely identify a column.
When converting from an `astropy.io.votable.tree.Table` object to
an `astropy.table.Table` object, you can specify whether to give
preference to ``name`` or ``ID`` attributes when naming the
columns. By default, ``ID`` is given preference. To give
``name`` preference, pass the keyword argument
``use_names_over_ids=True``::
>>> votable.get_first_table().to_table(use_names_over_ids=True)
This column of data can be extracted from the record array using::
>>> table.array['dec_targ']
array([17.15153360566, 17.15153360566, 17.15153360566, 17.1516686826,
17.1516686826, 17.1516686826, 17.1536197136, 17.1536197136,
17.1536197136, 17.15375479055, 17.15375479055, 17.15375479055,
17.1553884541, 17.15539736932, 17.15539752176,
17.25736014763,
# ...
17.2765703], dtype=object)
or equivalently::
>>> table.array['Dec']
array([17.15153360566, 17.15153360566, 17.15153360566, 17.1516686826,
17.1516686826, 17.1516686826, 17.1536197136, 17.1536197136,
17.1536197136, 17.15375479055, 17.15375479055, 17.15375479055,
17.1553884541, 17.15539736932, 17.15539752176,
17.25736014763,
# ...
17.2765703], dtype=object)
..
EXAMPLE END
Building a New Table from Scratch
---------------------------------
It is also possible to build a new table, define some field datatypes,
and populate it with data.
Example
^^^^^^^
..
EXAMPLE START
Building a New Table from a VOTable File
To build a new table from a VOTable file::
from astropy.io.votable.tree import VOTableFile, Resource, Table, Field
# Create a new VOTable file...
votable = VOTableFile()
# ...with one resource...
resource = Resource()
votable.resources.append(resource)
# ... with one table
table = Table(votable)
resource.tables.append(table)
# Define some fields
table.fields.extend([
Field(votable, name="filename", datatype="char", arraysize="*"),
Field(votable, name="matrix", datatype="double", arraysize="2x2")])
# Now, use those field definitions to create the numpy record arrays, with
# the given number of rows
table.create_arrays(2)
# Now table.array can be filled with data
table.array[0] = ('test1.xml', [[1, 0], [0, 1]])
table.array[1] = ('test2.xml', [[0.5, 0.3], [0.2, 0.1]])
# Now write the whole thing to a file.
# Note, we have to use the top-level votable file object
votable.to_xml("new_votable.xml")
..
EXAMPLE END
Outputting a VOTable File
-------------------------
To save a VOTable file, call the
`~astropy.io.votable.tree.VOTableFile.to_xml` method. It accepts
either a string or Unicode path, or a Python file-like object::
votable.to_xml('output.xml')
There are a number of data storage formats supported by
`astropy.io.votable`. The ``TABLEDATA`` format is XML-based and
stores values as strings representing numbers. The ``BINARY`` format
is more compact, and stores numbers in base64-encoded binary. VOTable
version 1.3 adds the ``BINARY2`` format, which allows for masking of
any data type, including integers and bit fields which cannot be
masked in the older ``BINARY`` format. The storage format can be set
on a per-table basis using the `~astropy.io.votable.tree.Table.format`
attribute, or globally using the
`~astropy.io.votable.tree.VOTableFile.set_all_tables_format` method::
votable.get_first_table().format = 'binary'
votable.set_all_tables_format('binary')
votable.to_xml('binary.xml')
Using `astropy.io.votable`
==========================
Standard Compliance
-------------------
`astropy.io.votable.tree.Table` supports the `VOTable Format Definition
Version 1.1
`_,
`Version 1.2
`_,
and the `Version 1.3 proposed recommendation
`_.
Some flexibility is provided to support the 1.0 draft version and
other nonstandard usage in the wild. To support these cases, set the
keyword argument ``pedantic`` to ``False`` when parsing.
.. note::
Each warning and VOTABLE-specific exception emitted has a number and
is documented in more detail in :ref:`warnings` and
:ref:`exceptions`.
Output always conforms to the 1.1, 1.2, or 1.3 spec, depending on the
input.
.. _pedantic-mode:
Pedantic mode
^^^^^^^^^^^^^
Many VOTable files in the wild do not conform to the VOTable
specification. If reading one of these files causes exceptions, you
may turn off pedantic mode in `astropy.io.votable` by passing
``pedantic=False`` to the `~astropy.io.votable.parse` or
`~astropy.io.votable.parse_single_table` functions::
from astropy.io.votable import parse
votable = parse("votable.xml", pedantic=False)
Note, however, that it is good practice to report these errors to the
author of the application that generated the VOTable file to bring the
file into compliance with the specification.
Even with ``pedantic`` turned off, many warnings may still be omitted.
These warnings are all of the type
`~astropy.io.votable.exceptions.VOTableSpecWarning` and can be turned
off using the standard Python `warnings` module.
Missing Values
--------------
Any value in the table may be "missing". `astropy.io.votable` stores
a ``numpy`` masked array in each `~astropy.io.votable.tree.Table`
instance. This behaves like an ordinary ``numpy`` masked array, except
for variable-length fields. For those fields, the datatype of the
column is "object" and another ``numpy`` masked array is stored there.
Therefore, operations on variable-length columns will not work — this
is because variable-length columns are not directly supported
by ``numpy`` masked arrays.
Datatype Mappings
-----------------
The datatype specified by a ``FIELD`` element is mapped to a ``numpy``
type according to the following table:
================================ =========================
VOTABLE type NumPy type
================================ =========================
boolean b1
-------------------------------- -------------------------
bit b1
-------------------------------- -------------------------
unsignedByte u1
-------------------------------- -------------------------
char (*variable length*) O - A ``bytes()`` object.
-------------------------------- -------------------------
char (*fixed length*) S
-------------------------------- -------------------------
unicodeChar (*variable length*) O - A `str` object
-------------------------------- -------------------------
unicodeChar (*fixed length*) U
-------------------------------- -------------------------
short i2
-------------------------------- -------------------------
int i4
-------------------------------- -------------------------
long i8
-------------------------------- -------------------------
float f4
-------------------------------- -------------------------
double f8
-------------------------------- -------------------------
floatComplex c8
-------------------------------- -------------------------
doubleComplex c16
================================ =========================
If the field is a fixed-size array, the data is stored as a ``numpy``
fixed-size array.
If the field is a variable-size array (that is, ``arraysize`` contains
a '*'), the cell will contain a Python list of ``numpy`` values. Each
value may be either an array or scalar depending on the ``arraysize``
specifier.
Examining Field Types
---------------------
To look up more information about a field in a table, you can use the
`~astropy.io.votable.tree.Table.get_field_by_id` method, which returns
the `~astropy.io.votable.tree.Field` object with the given ID.
Example
^^^^^^^
..
EXAMPLE START
Examining Field Types in VOTables with astropy.io.votable
To look up more information about a field::
>>> field = table.get_field_by_id('Dec')
>>> field.datatype
'char'
>>> field.unit
'deg'
.. note::
Field descriptors should not be mutated. To change the set of
columns, convert the Table to an `astropy.table.Table`, make the
changes, and then convert it back.
..
EXAMPLE END
.. _votable-serialization:
Data Serialization Formats
--------------------------
VOTable supports a number of different serialization formats.
- `TABLEDATA
`__
stores the data in pure XML, where the numerical values are written
as human-readable strings.
- `BINARY
`__
is a binary representation of the data, stored in the XML as an
opaque ``base64``-encoded blob.
- `BINARY2
`__
was added in VOTable 1.3, and is identical to "BINARY", except that
it explicitly records the position of missing values rather than
identifying them by a special value.
- `FITS
`__
stores the data in an external FITS file. This serialization is not
supported by the `astropy.io.votable` writer, since it requires
writing multiple files.
The serialization format can be selected in two ways:
1) By setting the ``format`` attribute of a
`astropy.io.votable.tree.Table` object::
votable.get_first_table().format = "binary"
votable.to_xml("new_votable.xml")
2) By overriding the format of all tables using the
``tabledata_format`` keyword argument when writing out a VOTable
file::
votable.to_xml("new_votable.xml", tabledata_format="binary")
Converting to/from an `astropy.table.Table`
-------------------------------------------
The VOTable standard does not map conceptually to an
`astropy.table.Table`. However, a single table within the ``VOTable``
file may be converted to and from an `astropy.table.Table`::
from astropy.io.votable import parse_single_table
table = parse_single_table("votable.xml").to_table()
As a convenience, there is also a function to create an entire VOTable
file with just a single table::
from astropy.io.votable import from_table, writeto
votable = from_table(table)
writeto(votable, "output.xml")
.. note::
By default, ``to_table`` will use the ``ID`` attribute from the files to
create the column names for the `~astropy.table.Table` object. However,
it may be that you want to use the ``name`` attributes instead. For this,
set the ``use_names_over_ids`` keyword to `True`. Note that since field
``names`` are not guaranteed to be unique in the VOTable specification,
but column names are required to be unique in ``numpy`` structured arrays (and
thus `astropy.table.Table` objects), the names may be renamed by appending
numbers to the end in some cases.
Performance Considerations
--------------------------
File reads will be moderately faster if the ``TABLE`` element includes
an nrows_ attribute. If the number of rows is not specified, the
record array must be resized repeatedly during load.
.. _nrows: http://www.ivoa.net/documents/REC/VOTable/VOTable-20040811.html#ToC10
See Also
========
- `VOTable Format Definition Version 1.1
`_
- `VOTable Format Definition Version 1.2
`_
- `VOTable Format Definition Version 1.3, Proposed Recommendation
`_
.. note that if this section gets too long, it should be moved to a separate
doc page - see the top of performance.inc.rst for the instructions on how to do
that
.. include:: performance.inc.rst
Reference/API
=============
.. automodapi:: astropy.io.votable
:no-inheritance-diagram:
:skip: VOWarning
:skip: VOTableChangeWarning
:skip: VOTableSpecWarning
:skip: UnimplementedWarning
:skip: IOWarning
:skip: VOTableSpecError
.. automodapi:: astropy.io.votable.tree
:no-inheritance-diagram:
.. automodapi:: astropy.io.votable.converters
:no-inheritance-diagram:
.. automodapi:: astropy.io.votable.ucd
:no-inheritance-diagram:
.. automodapi:: astropy.io.votable.util
:no-inheritance-diagram:
.. automodapi:: astropy.io.votable.validator
:no-inheritance-diagram:
.. automodapi:: astropy.io.votable.xmlutil
:no-inheritance-diagram:
astropy.io.votable.exceptions Module
------------------------------------
.. toctree::
:maxdepth: 1
api_exceptions.rst